ISM/LoRa HPModule

High-power LoRa for longer range and better reach through walls and terrain, in an M.2 form factor.

  • High-power LoRa for maximum range
  • Gets through walls, buildings and terrain
  • Run your own network on LoRaWAN or Jooni star
  • M.2 card form factor
Get a dev kitGet a quoteView docs
Jooni ISM/LoRa HP module

ISM/LoRa HP

Easy to integrate, quick to deploy, and ready to scale

A manufacturing plant with assembly halls, a rail spur, cooling towers and storage yards
Your app
Pre-certified
An FCC and ISED certified LoRa radio, so your product's certification starts further along.
High power
Transmits at up to +28 dBm, against +22 dBm on the standard ISM/LoRa module, for more range.
Better reach
Higher power gets through walls, buildings and terrain, for dense plants and rugged sites.
Your network
Run LoRaWAN on your own gateways or a public network, or a Jooni star network on your own equipment.
Power efficient
Sleeps at about 9 µA, so battery-powered devices last longer and run reliably in the field.
Built to scale
Jooni Cloud is ready at power-up: fleet management, over-the-air updates and routing to any endpoint.

ISM/LoRa HP

Inside the module

Interfaces

Serial API. Your device talks to the module through a simple serial API.
Command line. Set up and test the module over USB while you develop.
GPIO. Spare pins for your own signals and controls.
Reset + Enable. Hardware pins let your device reset or enable the module.

Intelligence

Jooni firmware

One API across the Jooni module family

Compression. Readings are compressed before they're sent, saving airtime and power.
Store and forward. Readings wait on the module during outages, then send.
Network routing. Every reading finds its way to Jooni Cloud.
Efficiency. Deep sleep between transmissions means battery-powered devices run longer.
Over-the-air updates. New firmware arrives over the air, with no site visit.
Cloud-synced settings. Change a setting in Jooni Cloud and the module picks it up.
Onboard storage. Data stays on the module, even through power loss.

Wireless communication

LoRa. High-power LoRa for longer range, with LoRaWAN and Jooni star networks.
Antenna port. Connect the antenna that suits your enclosure.

Cloud

Jooni Cloud

Included with every module

Fleet management. See every device's status in one place.
Remote configuration. Control any device and roll out updates from anywhere.
Data to your apps. Readings flow to your own systems through the APIs.

Device identity · Encrypted in transit

ISM/LoRa HP

Module specifications

The ISM/LoRa HP module at an angle, showing its shielded LoRa radio, antenna connector and M.2 edge connector

Connectivity

LoRa
863 to 928 MHz, license-free ISM
Networks
LoRaWAN and Jooni star
Regional plans
EU868, US915, AU915, AS923, IN865, KR920
Transmit power
+28 dBm (max)

Interfaces

Serial
3.3 V UART, Jooni serial API
USB
Command-line interface
GPIO
4, plus Reset and Enable

Power

Supply voltage
3.0 to 5.5 V (USB: 4.5 to 5.5 V)
Sleep current
8.9 µA at 5 V
Idle current
15 mA at 5 V

Physical and certification

Package
M.2 Key E
Dimensions
30 × 42 mm
Operating temperature
−40 to +85 °C
Certifications
FCC, ISED

ISM/LoRa HP

Frequently asked questions

  • It transmits at higher power, up to +28 dBm, for longer range and better penetration through walls and terrain. It uses the M.2 Key E form factor.

  • The module supports both. LoRaWAN is a widely adopted standard and can run on your own gateways or on a public network operator. In a Jooni star network, devices report to a Jooni gateway module on site, so the LoRa network runs on your own equipment.

  • The firmware supports six regional plans: EU868, US915, AU915, AS923, IN865 and KR920.

  • 3.0 to 5.5 V.

ISM/LoRa HP

Explore in 3D

Scroll to load 3D

Start building with the ISM/LoRa HP module

Get a dev kitGet a quoteView docs