ISM/LoRa GNSSModule

Location tracking over long-range LoRa, for moving assets that don't need cellular.

  • Tracks assets over long-range LoRa
  • Built-in GNSS, no cellular needed
  • Power efficient, with a 9 µA sleep current
Get a dev kitGet a quoteView docs
Jooni ISM/LoRa GNSS module

ISM/LoRa GNSS

Easy to integrate, quick to deploy, and ready to scale

A cattle ranch with a grazing herd, a tractor with hay, a pickup truck and a windmill-fed water trough
Your app
Pre-certified
An FCC and ISED certified LoRa radio, so your product's certification starts further along.
No cellular needed
GNSS on the module, with position and sensor data sent over LoRa to a gateway on site, so tracking works wherever your LoRa network reaches.
Your network
Run LoRaWAN on your own gateways or a public network, or a Jooni star network on your own equipment.
No airtime fees
LoRa runs on license-free ISM spectrum, so there's no carrier charge between your devices and the gateway.
Power efficient
Sleeps at about 9 µA, so battery-powered devices last longer and run reliably in the field.
Built to scale
Jooni Cloud is ready at power-up: fleet management, over-the-air updates and routing to any endpoint.

ISM/LoRa GNSS

Inside the module

Interfaces

Serial API. Your device talks to the module through a simple serial API.
Command line. Set up and test the module over USB while you develop.
GPIO. Spare pins for your own signals and controls.
Reset + Enable. Hardware pins let your device reset or enable the module.

Intelligence

Jooni firmware

One API across the Jooni module family

Compression. Readings are compressed before they're sent, saving airtime and power.
Store and forward. Readings wait on the module during outages, then send.
Network routing. Every reading finds its way to Jooni Cloud.
Efficiency. Deep sleep between transmissions means battery-powered devices run longer.
Over-the-air updates. New firmware arrives over the air, with no site visit.
Cloud-synced settings. Change a setting in Jooni Cloud and the module picks it up.
Onboard storage. Data stays on the module, even through power loss.

Wireless communication

LoRa. Long-range, low-power LoRa, with LoRaWAN and Jooni star networks.
GNSS location. Built-in GNSS gives each device its own position, no cellular needed.
Antenna port. Connect the antenna that suits your enclosure.

Cloud

Jooni Cloud

Included with every module

Fleet management. See every device's status in one place.
Remote configuration. Control any device and roll out updates from anywhere.
Data to your apps. Readings flow to your own systems through the APIs.

Device identity · Encrypted in transit

ISM/LoRa GNSS

Module specifications

Connectivity

LoRa
863 to 928 MHz, license-free ISM
Networks
LoRaWAN and Jooni star
Regional plans
EU868, US915, AU915, AS923, IN865, KR920
GNSS
Built in

Interfaces

Serial
UART, Jooni serial API
USB
Command-line interface
Control
GPIO, Reset and Enable

Physical and certification

Package
Jooni 20-pin
Operating temperature
−40 to +85 °C
Certifications
FCC, ISED

ISM/LoRa GNSS

Frequently asked questions

  • Yes. The module sends position and sensor data over LoRa to a gateway on site, so tracking works wherever your LoRa network reaches, without a cellular connection on the device.

  • The module supports both. LoRaWAN is a widely adopted standard and can run on your own gateways or on a public network operator. In a Jooni star network, devices report to a Jooni gateway module on site, so the LoRa network runs on your own equipment.

  • For positioning, yes. The GNSS antenna needs an unobstructed view of the sky; LoRa does not.

ISM/LoRa GNSS

Explore in 3D

Scroll to load 3D

Start building with the ISM/LoRa GNSS module

Get a dev kitGet a quoteView docs