Cellular Cat 1 bisModule
High-bandwidth LTE for devices that send lots of data, anywhere with cell coverage.
- Bandwidth for data-heavy devices
- FCC and ISED certified cellular radio
- 21 LTE bands for international rollouts
- Multi-carrier global eSIM
Cellular Cat 1 bis
Easy to integrate, quick to deploy, and ready to scale
- Pre-certified
- An FCC and ISED certified cellular radio, so your product's certification starts further along.
- Global coverage
- A multi-carrier eSIM covers 21 LTE bands for international rollouts. No SIM cards or carrier contracts.
- High bandwidth
- Up to 5 Mbps up and 10 Mbps down under the Cat 1 bis spec, for gateways, telematics and larger payloads.
- Edge memory
- A time-series database on the module holds every reading through outages and power loss until it's back online.
- Industrial grade
- Rated from −40 °C to +85 °C, for outdoor and industrial sites.
- Built to scale
- Jooni Cloud is ready at power-up: fleet management, over-the-air updates and routing to any endpoint.
Cellular Cat 1 bis
Inside the module
Interfaces
Intelligence
Jooni firmware
One API across the Jooni module family
Wireless communication
Cloud
Jooni Cloud
Included with every module
Device identity · Encrypted in transit
Cellular Cat 1 bis
Module specifications
Connectivity
- Cellular
- LTE Cat 1 bis
- LTE bands
- B1, 2, 3, 4, 5, 7, 8, 12, 13, 18, 19, 20, 25, 26, 28, 34, 38, 39, 40, 41, 66
- SIM
- Multi-carrier global eSIM, built in
- Data rate
- 5 Mbps up, 10 Mbps down (peak)
- Transmit power
- +23 dBm (max)
- Antenna
- u.FL, 50 Ω
Interfaces
- Serial
- 3.3 V UART, Jooni serial API
- USB
- Command-line interface
- GPIO
- 4, plus Reset and Enable
Power
- Supply voltage
- 3.0 to 5.5 V (USB: 4.5 to 5.5 V)
- Supply power
- 2.0 W recommended, 1.65 W minimum
- Sleep current
- 8.9 µA at 5 V
- Idle current
- 15 mA at 5 V
- Peak transmit current
- 400 mA at 5 V, 650 mA at 3.3 V
Physical and certification
- Package
- Jooni 20-pin
- Dimensions
- 36 × 28 mm
- Operating temperature
- −40 to +85 °C
- Certifications
- FCC, ISED
Cellular Cat 1 bis
Frequently asked questions
Choose Cat 1 bis for devices that need more bandwidth, such as gateways, telematics units and devices that send larger payloads. For low-power sensors that report periodically, LTE-M draws less power and reaches further into buildings.
Under the 3GPP LTE Cat 1 bis specification, up to 5 Mbps uplink and 10 Mbps downlink. Actual rates depend on signal quality and the carrier.
The module supports 21 LTE bands for global coverage. See the coverage map for supported regions.
No. The module does not include a GNSS receiver. For positioning, choose a Jooni module with GNSS built in.
The cellular radio is FCC and ISED certified, which simplifies certifying your connected product. Your finished product may still require its own testing, depending on its other components.
Cellular Cat 1 bis